New Construction Drywall in Provo, UT
Provo Quality Drywall hangs and finishes new construction drywall in Provo, UT for houses, additions, and builder projects. Ceilings go up first, then walls, with joints kept off the corners of openings when the framing allows. We tape, mud, and sand to the finish level on the plans and schedule each phase so painters and trim carpenters can follow. After we see the plans or the framed house, you get a written estimate with labor, material, and dates. Typical installation in this area runs about $1.50 to $3.50 per square foot, depending on size, board type, and finish.
Provo Quality Drywall provides this work to Provo, UT and surrounding cities, including Orem, Lindon, Springville, Mapleton, and Spanish Fork.
Why new-construction hanging is scheduled this way
- The bid is broken out so a builder can compare labor and material, not just a lump sum.
- Finish level and texture are agreed in writing before the first sheet goes up.
- We plan around the other trades instead of treating the hang as an isolated visit.
Request a FREE Quote.
Get the numbers you need to plan with confidence—no pressure, just clear and honest pricing.
New Construction Drywall Options in Provo, UT
Provo still adds houses and additions on the west side and toward the foothills, and the hang on a new frame is a different job from a patch in an older Joaquin or Maeser house. The options below cover how that work is usually scoped.
New Home Drywall Hang and Finish
On a new Provo home we hang ceilings first, then walls, and we keep joints off window and door corners when we can. Board type follows the room: standard gypsum in most living space, moisture-resistant board in baths, Type X where a rating is required. Taping and texture follow the finish level on the plans, usually Level 4 for painted rooms, Level 5 if the walls will be smooth or glossy or washed by strong side light.
Builder Bids and Scheduling
Send plans, the finish level, the texture, and the dates you need. Provo Quality Drywall returns a bid broken out by labor and material and a hang-tape-finish schedule the rest of the trades can plan around. If the heat is not on yet, finishing waits. Joint compound should stay at about 50°F or warmer until it dries, which matters on winter builds in the Utah Valley.
Additions Tied Into Existing Houses
An addition has to meet walls that may be decades older. We match the existing texture and finish level at every tie-in so the new rooms do not read as a later add-on. That matching step is part of the estimate, not an afterthought once the new board is already up.
New Construction Drywall Sequencing in Provo, UT
The hang should not start until framing, rough mechanical, and inspections are far enough along that we are not working around open walls that still have to change. We check for outstanding punches in the framing, confirm the board list, and protect floors before the first sheet. After finishing and texture, the rooms are cleaned so paint and trim can move in. If you want the garage finished to a lower level than the house, that is called out on the bid so the two spaces are not finished the same by habit. Foothill lots and west-side lots in Provo have the same drywall sequence; the difference is access and how tightly the house is scheduled against other trades, which we will put in the estimate after the walk-through.
Owner-builders in Provo often arrive with a set of plans and a target move-in date, but without a superintendent coordinating every trade. In that case we will tell you, in the estimate, what has to be finished before we hang — inspections, mechanical rough-in, and a weather-tight, heatable shell — so the schedule is honest. If those items slip, the hang date slips with them rather than starting in a house that is still changing.
New Construction Drywall Process in Provo, UT
1. Plans and walk-through. We review drawings or walk the framed house, confirm finish level and texture, and write the estimate and schedule.
2. Prep. Floors are protected, and we check framing, boxes, and any damp spots before hanging.
3. Hanging. Ceilings first, then walls, using the board each room needs.
4. Taping, sanding, and texture. Coats dry between passes. Texture matches the agreed pattern, including orange peel or knockdown when that is what the house uses.
5. Walkthrough. We punch the finish, clean the rooms, and turn them over for primer and paint.
New Construction Drywall FAQs in Provo, UT
Does Provo Quality Drywall work with builders and owner-builders?
Yes. Provo Quality Drywall bids new homes, additions, and basement finishes from plans, and we break out labor and material when a general contractor asks for it.
What finish level should a new Provo house use?
Level 4 is the usual choice for painted walls. Choose Level 5 for smooth or glossy walls, or for rooms with strong side light. Garages are often Level 2 or 3.
Can you finish drywall in winter on a new build?
Yes, if the space is heated and stays at about 50°F or warmer until the compound dries. If the heat is not on, finishing should wait.
How long does a new-home hang take?
It depends on the size of the house, the finish level, and drying time between coats. The written estimate includes a schedule rather than a generic number of days.
Written Estimate for This Work in Provo, UT
Call (385) 438-8377 or use the quote form to schedule a site visit. Provo Quality Drywall will look at the framed house or the plans and send a written estimate that lists the scope, the price, and the schedule before any board is hung.